Keep disconnecting!

[LooN]

Please, if someone knows how to resolve this issue I would love to know. This is what I get:



I get this randomly in the game, my internet is still working and I do not disconnect from mIRC. Any help is appreciated.

[Sarathos]

Does your firewall allows Warcraft 3?

Might be the issue.

Try reinstalling it too.

[Atlantes]

can you test if the line quality is good?
http://www.pingtest.net/

[Lagoon]

Maybe you dont have all your ports open to warcraft III.
Maybe try http://www.portforward.com to unlock your ports.

Also try to go to your router homepage which some be your IP address in search bar. For example mine is 192.168.0.1 .

Regards

[Sarathos]

To go to your router control panel simply write your IP in the adress bar.

[Lagoon]

Easiest way to get your IP if you dont know it is
to:

- Click Start, then Run, type in cmd and press enter.

- At the command prompt type ipconfig, then press enter.

- Note down your ip, open Internet Explorer and then type it into Address bar.

- If you are confronted with Login, it should be your service providers, if you already know it thats good, if you dont then either ring your service provider.
If you have not touched this it should be at default.

e.g. for sky as your service provider it would be.

Username: Admin
Password: sky

Regards,

[Sarathos]

No, the easiest way is to go to www.whatismyip.com xD


And there is usually no password unless you applied one yourself.

Standard Login info:

Username: admin
No password

[Lagoon]

Actually whatismyipaddress only tells u ur virtual IP, is not very useful. so my way it still better :P and not so much effort.

Also some routers are set up like that, i know sky is Admin and sky maybe some others are same.

But yes sometimes no password but for router the usually have passwords.

[Atlantes]

You guys have no idea what you are talking about isn't it? Virtual ip's?? router configs. Damn wtf guys

as i said

1. first check if line quality is good:
http://www.pingtest.net/

2. restart your modem and router

3. turn of the firewall in your pc.

4. try to reset your winsock
http://windowsxp.mvps.org/winsock.htm

and for infector and isolegacy please read this: http://www.vicomsoft.com/glossary/addresses.html .

Public ip = www.whatismyip.com
Private ip = start, run, cmd, enter, ipconfig, enter, and there you can see your ip-adress.

The default gateway is your connection to your router so if you want to change something in your router, go to internet explorer and enter the default gateway (most of the time 192.168.0.1 or 172.16.0.1).

[Lagoon]

You guys have no idea what you are talking about isn't it? Virtual ip's?? router configs. Damn wtf guys

as i said

1. first check if line quality is good:
http://www.pingtest.net/

2. restart your modem and router

3. turn of the firewall in your pc.

4. try to reset your winsock
http://windowsxp.mvps.org/winsock.htm

and for infector and isolegacy please read this: http://www.vicomsoft.com/glossary/addresses.html .

Public ip = www.whatismyip.com
Private ip = start, run, cmd, enter, ipconfig, enter, and there you can see your ip-adress.

The default gateway is your connection to your router so if you want to change something in your router, go to internet explorer and enter the default gateway (most of the time 192.168.0.1 or 172.16.0.1).

As you know i already stated that infector was talking about public IP. and i already told to go start run ect. so dont know why your re-stating this.

And no its not his line quality thats making him disconnect. from past experience. So your whole blabber was worth nothing trying to make us look stupid and re-state comments already made

[Lagoon]

And also we know what were talkiing about and you just google this. the guy could have done this himself ...

[Atlantes]

"Actually whatismyipaddress only tells u ur virtual IP"

there is a difference between virtual and public..... There is nothing virtual about that ip

And i did not googled it xD U study ict for 4 years now -.-' i have Cisco Certificates, Citrix Certificates and Microsoft Certificates so yes I know a bit about computers.

And it is possible that it is the line quality. The reason i say that is because a connectors can be damaged or there is maybe a new microwave installed that is next to a network cable.


"- At the command prompt type ipconfig, then press enter.

- Note down your ip, open Internet Explorer and then type it into Address bar."

that is your ip. not the ip of the router. the ip of the router is the default gateway

[Lagoon]

Yes i know its not the IP of the router, its to access router settings.

:P and gratz on your certificates i guess? no need to fight it could be multiple problems, and saying we dont know what were saying isnt very friendly now is it :P

[Sarathos]

Indeed Legacy . Anyweh thanks for the help Atlantes. LooN i suggest you try all possible options to see if it works.

[Little.Bug]

Well, just from the top of my head. Some programs cause you to get disconnected from some host bots at start game.

Some customkey programs, Maphack Programs, Banlist etc.

So turn of your maphack, maybe that will work hehe :P

[Atlantes]

Yes i know its not the IP of the router, its to access router settings.

Maybe it isn't friendly but it is the truth srry but the internet gateway ip is the ip to access the router settings because the website runs on the router.

If you enter your own ip you will see your own website (if you host any) and otherwise you will get a time-out or something like that.

Example:

Router = 192.168.0.1
PC = 192.168.0.200
PC2 = 192.168.0.100
Printer = 192.168.50

So to change the settings in the router you need to go to the browser and go the website http://192.168.0.1/

understand?

[Lagoon]

Maybe it isn't friendly but it is the truth srry but the internet gateway ip is the ip to access the router settings because the website runs on the router.

If you enter your own ip you will see your own website (if you host any) and otherwise you will get a time-out or something like that.

Example:

Router = 192.168.0.1
PC = 192.168.0.200
PC2 = 192.168.0.100
Printer = 192.168.50

So to change the settings in the router you need to go to the browser and go the website http://192.168.0.1/

understand?

Yes this is what i was refering to the Default Gateway i already said it was 192.168.0.1 if you look again..

Enough smart talk ! we get you have 'certificates' no need to brag .

[PeLaTis]

don't bother reading it you have the ip on the manual book given with rooter installation guide.
find it from there and go put on trust wc3 simple. closed